E-mail:jinyuanzhaocheng@163.com

Yangzhou Jinyuan Lamps Co.,Ltd

Telephone:

+86-0514-84022888

Solar Street Light Outdoor Commercial
Solar Street Light Outdoor Commercial

Solar Street Light Outdoor Commercial

Solar Street Light Outdoor Commercial Solar Street Light Introduction Solar street lamps are powered by crystalline silicon solar cells, storage in accumulator for LED light source, controlled by intelligent charge and discharge controller, which is used instead of traditional public electric...

Send InquiryChat Now

  • Product Details

Solar Street Light Outdoor Commercial
Solar Street Light Introduction
Solar street lamps are powered by crystalline silicon solar cells, storage in accumulator for LED light source, controlled by intelligent charge and discharge controller, which is used instead of traditional public electric lighting. No need to install cables, no AC power supply, no electricity charges; with good stability, long life, high luminous efficiency, simple installation, high safety performance, energy saving and environmental protection, economical and practical advantages. This outdoor solar powered LED wall mount street light can be widely used in urban main road, district, factory, tourist attraction, parking garden, hallway etc.


Solar Street Light Components

image003(001).jpg

image005(001).jpg

LED lamp

Battery

image007(001).jpg

image001(001).jpg

Solar Panel

Controller


Installation of Solar Street Light Pole:
1. Connect bracket and solar panel

image009(001).jpg

To avoid abrasion and scratch of solar panel glass, please handle gently.
Tighten the fastening screw. Draw out the wire of solar panel from the pole.


2. Connect bracket and pole

image010(001).jpg

To ensure the azimuth of solar panel be south after hoisting, please calculate the azimuth of bracket during installation.
Tighten the fastening screw after adjusting the angle.
Draw the wire of solar panel out of the pole and pull it to controller.


3. Install LED lamp

image011(001).jpg

Put the lamp shell face down when install it and ensure the emitting direction of light be vertical to the ground after hoisting.
Tighten the fastening screw after adjusting the angle.
Draw the wire of lamp head out of the pole and pull it to controller..


4. Install battery

image012(001).jpg

Put the battery in the battery box and mat the waterproof cushion, then connect the wire and protective casing.


5. Erect pole
Before erection, check and keep all the components are tightened, the solar panel is face to south (with compass), and the orientation of lamp is right;
During erecting, installation personnel should hold the pole and prevent the components rock and rub with the ground;
In the process of erection, adjust the lamp head to toward the road, align the base plate hole to the anchor bolts; when the base plate fall on the foundation, fix two nuts successively; then adjust the verticality of pole and ground; Tighten the nuts with spanner at last.


6. Install controller

image013(001).jpg

Confirm connection location and anode & cathode marks of solar panel, LED lamp head and battery before connecting.


Hot Tags: solar street light outdoor commercial, China, suppliers, manufacturers, factory, customized, buy, bulk
Related Products
  • Feedback